ZC-Q2255,OMRON安全開關價格
在輸入端子上有外加輸入的狀態下轉動旋鈕在整定值
等于輸入值時,報警LED閃爍。整定時請作為參考。
額定輸入因型號、切換開關的設定而異。
例)K8AK-PM1、切換開關2=OFF(三相3線模式)
切換開關3、4=OFF、OFF(額定電壓200V)時。
企業QQ:2880626086
手機:
:劉艷
相時電機端子上的感應電壓。從圖中可以看出,電機的負
載較輕時,即使出現缺相,電機端子的電壓也不會有太
phase terminal voltage. The horizontal axis represents
Motor load (phase% for the rated load), the vertical
axis represents the voltage (with respect to the amount of
% Voltage) set. The solid lines are at different loads大
下降,因此無法進行缺相檢測。要對運轉中的電機負載進
行缺相檢測,請使用欠電壓檢測功能,檢測缺相時的電機
此時,動作時間整定會對缺相發生至跳閘為止的時間造成
通常三相電機在運轉中,即使有1相斷線,也會繼續轉動,
并且端子上會有三相感應電壓。為三相電機在承
terminals. The following figure shows the three-
By load condition, R-phase induction missing state
ZC-Q2255,OMRON安全開關價格